STABLE-SCREED INDUSTRIAL TOP

 CEMENTITIOUS SELF-SMOOTHING FLOOR COMPOUND 5-100mm

 

PRODUCT DESCRIPTION

Stable-Screed IT is a highly durable, cementious self-smoothing compound for floor installation and renovation, providing an extremely hard wearing finish. When mixed with water, Stable-Screed IT gives a highly fluid, fast setting, self smoothing compound. Stable-Screed IT is specially formulated and is non hazardous and protein free. Stable-Screed IT is designed to provide a material of very rapid strength gain and excellent adhesion which enable fast track applications.

AREAS OF USE

Stable-Screed IT is used to refurbish old, damaged concrete floors or, alternatively, to provide a levelling screed for new hard wearing floors.

PROPERTIES

• Fast track installation
• Heavy duty
• Superb bonding properties to primers
• Special class abrasion resistance
• Rapid strength gain
• High flowability
• Pumpable System
• can be colour matched to suit specific project

 

METHOD OF APPLICATION PREPARATION

The substrate should be dry and free from grease, oil or other forms of contamination. The substrate should be roughened to achieve an adequate key. Expansion joints must be re-sawn after application and filled with a suitable jointing material.

MIXING / APPLICATION

Prime the surface with two coats of Stable-Screed primer diluted 1 part primer to 3 parts water. The primer should be applied by soft broom allowing the first coat to dry before the second application. Screed primer should be dry before screed application. Stable-Screed IT may be pumped using a conventional screed pump (eg M-Tec or PFT) - the water gauge should be adjusted to achieve the required flow. After placing, spread to the required thickness using a serrated spatula or pin screed. Entrapped air and trowel marks should be removed with a spiked roller. Stable-Screed IT may also be applied manually. Add one 25Kg bag of powder to 5.0 litres of clean water in a mixing vessel and mix using a slow speed drill and paddle. Mix for 3 minutes or until smooth, lump free uniform consistency is achieved. Under no circumstances should the recommended water addition be exceeded. Minimum application temperature 4°C.

SEALING

Stable-Screed IT should always be sealed between 12 and 48 hours after application due to the porous nature of the screed which can be easily stained by liquids. Stable-Screed IT can be sealed with clear or coloured FFD Hydra coat epoxy paint. (see separate data sheet)

TECHNICAL DATA

PACKAGING:

Stable-Screed IT                  25Kg bags

Stable-Screed Primer          25L drums (sold seperately)

TEMPERATURE RANGE       4°C and 30°C

COVERAGE:                        Stable-Screed IT          1.7Kg/m2/mm @ 5mm minimum

                                            Stable-Screed Primer  0.06 Kg /m2 /coat diluted 1:3

NOTE: COVERAGE WILL VARY WITH SUBSTRATE NATURE AND APPLICATION METHOD

THICKNESS:                          5 - 100mm

FLOW:                                  195 – 215mm tested with manu flow mould @ 20°C on moistened steel plate

IMPACT RESISTANCE:         < 2mm

ABRASION RESISTENCE:     Conforms to BS 8204 AR1 Class

COMPRESSIVE STRENGTH: 19N/mm2@24 HOURS (DIN 1164) 35N/mm2@28 DAYS (DIN 1164) 

AVERAGE COMPRESSIVE STRENGTH IN N/mm2

AGE            24HOURS    14DAYS     28DAYS

STRENGTH       19               30             40

CURING:      INITIAL CURE IN 3 –4 HOURS. FULLY CURED MATERIAL IS COMPLETELY INERT AND IS NOT CLASSIFIED AS HARMFUL TO ANY EC REGULATION

POT LIFE:    20 MINUTES

OPERATION & MAINTENANCE: MANUALS AND CLEANING EQUIPMENT ON REQUEST SAFETY: ALWAYS WEAR SUITABLE PROTECTION FOR EYES, HANDS AND SKIN WHEN HANDLING CEMENTS. FOR DETAILED INFORMATION REFER TO SAFETY DATA SHEETS

SHELF LIFE: 1 YEAR IN SEALED CONTAINERS STORED IN FROST FREE WAREHOUSE CONDITIONS

PRODUCTS ARE GUARANTEED AGAINST DEFECTIVE MATERIALS AND MANUFACTURE AND ARE SOLD SUBJECT TO OUR STANDARD TERMS AND CONDITIONS OF SALE, COPIES OF WHICH CAN BE OBTAINED ON REQUEST.WHILST HORSEMAT TRY TO ENSURE THAT ANY INFORMATION IT MAY GIVE IS ACCURATE AND CORRECT, IT CANNOT, BECAUSE IT HAS NO CONTROL OVER WHERE OR HOW ITS PRODUCTS ARE USED OR APPLIED, ACCEPT ANY LIABILITY EITHER DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF ITS PRODUCTS, WHETHER OR NOT IN ACCORDANCE WITH ANY ADVICE, RECOMMENDATION, SPECIFICATION OR INFORMATION GIVEN BY IT.