6mm Reinforced Rubber Insertion

Reference: HM6mmIns.

£27.60 inc V.A.T

6mm Reinforced Rubber Insertion is a 1.4m (55″) wide fabric reinforced roll material.  Used typically as partition rubber in horseboxes, paddle rubbers in horse walkers, or for wall material in stables. It is supplied in cut pieces up to 10mt long.


6mm Reinforced Rubber Insertion, a roll form material with a fabric reinforcement insertion.  This high strength nylon runs through the middle of the material for tear resistance. It can be used in a variety of applications, including the following;

  • Horsebox lining and partitions
  • Stable Walls
  • Paddles for Horse Walkers

This material can be cut to size with a sharp stanley knife and a straight edge.  If you would prefer, we can cut into required shapes and sizes using our tool-less cutting equipment.

Fixing to your partition or stable wall can be by clamping bar, rivet, or screwed to the top board, or by screwing/rivetting direct using large capture heads/washers. We are also able to supply the material pre-cut with brass eyelet holes.

The material is in rolls 1400mm (55″) wide and sold by the linear meter. Typically partitions are up to 2m long.  A sheet 1.4m x 2m will make 3 strips approx 18″ wide x 6ft 6in for partitions.


Additional information

Weight 12 kg
Dimensions 120 × 110 × 50 cm

Size Guide

Tab Content

You may also like…