Wall Mat Fixings

Reference: 123620

£31.80 inc V.A.T

 

Wall Mat Fixings are easy-to fit plastic,  animal friendly for almost any wall and mat combination.

Simple to fix, all that’s needed are a drill, 10mm wood/masonry bit and hammer!

These white pins are sold in packs of 100.

Description

Wall mat fixings are made from a durable glass-fibre reinforced polyamide.  They are suitable for fixing either EVA or solid Rubber or wall protection to concrete, brick or block walls.  It is possible to fix long fixings through board lined stable walls into solid uprights.

The large cap head on the fixing applies pressure to a larger area of the mat, reducing the possibility of tearing at the fixture point. For 10mm EVA mats, we suggest 600mm spacing, while for solid rubber mats, 300mm spacing is recommended (this does also depend on the composition of the wall).

The pins are 60mm long

Fitting

  • Drill a hole through the insulation material according to the total length of anchor plus 20mm
  • Insert the anchor until the head contacts the insulating material. The anchoring depth in the base material must be at least 30mm
  • Insert the expansion nail in the anchor.
  • Then expand with a hammer until the nail is flush

Additional information

Weight 1 kg
Dimensions 35 × 35 × 35 cm
Length

Short(60mm), Long (90mm)

Size Guide

Tab Content

You may also like…

10mm EVA

10mm Diamond EVA

£16.80 inc V.A.T

Out of Stock

a close up veiw of a 2omm EVA showing the diamonf patteren of the topside and the smooth back side of the mat

20mm EVA Wall Mat

£37.20 inc V.A.T

Out of Stock